Introduction to Cleanfix Firebird Commercial Steam Cleaner
|
|
Please note: the Cleanfix Firebird Commercial Steam Cleaner is temporarily unavailable. Please see our entire line of Commercial Vapor Steam Cleaners for alternatives.
The Cleanfix Firebird model is ideal for commercial applications and eliminates bacteria, molds and mites using powerful steam up to 306°F and a high extraction wet vacuum capacity. The Firebird is specially designed to withstand the toughest cleaning situations, all while providing durable and long-lasting strength. The steam cleaner/wet vacuum features fingertip controls that allow you to switch between steam or suction with the push of a button. Clean, degrease, sanitize and rinse large areas all in one simple step!
|
|
Cleanfix Firebird Commercial Steam Cleaner — ideal for someone who...
- Wants a maximum performing commercial/industrial cleaning system for multi-purpose degreasing, tile and grout restoration
- Needs a durable and long-lasting steam/vacuum cleaner to sanitize and clean large areas
- Has severe allergies, asthma or a compromised immune system and wants to kill microorganisms, viruses, germs, bacteria, dust mites, mold and other allergens without the use of chemicals
- Would like a steam cleaner that reaches high temperatures (309°F) and has a long running time
- Wants a unit with built in tool cart to carry all of the tools
|
|
How it Works — Cleanfix Firebird Commercial Steam Cleaner
- Cleaning with the steam jet nozzle and crevice tool. The steam jet nozzle is used to clean hard-to-reach areas. By means of the steam jet, dirt in edges, crevices and gaps is removed as follows: 1) press switch on handle for steam exhaust. 2) remove dirt with steam jet. 3) vacuum solved dirt with the crevice tool.
- Cleaning with the floor tool. Pre-spray a deep cleaner or floor cleaner directly onto heavily soiled areas and give the agent dwell time of a few minutes. First remove the dirt with steam by using the floor tool. Then vacuum the dirt and water with the vacuum motor turned on. Note that when moving the floor tool forwards, the dirt is loosened, and when moving it backwards, the dirt is vacuumed/picked up.
- Cleaning with the wall/window tool. For cleaning of glass and tiles, use the wall/window tool as follows: 1) press the switches for the steam valve and for the vacuum motor. 2) Place the tool on top of the area to be cleaned and pull it downwards. When pulling it downwards, stop the steam supply shortly before reaching the end of the strip to prevent steam from exhausting unnecessarily. 3) The wall/window tool is to be placed flat on the area to be cleaned to prevent condensed water from running down. 4) Where necessary, the tube with the steam hose can be used as an extension.
Note: Do not put any chemicals in the boiler tank.
|
|
;)
