Introduction to Doulton Dual Countertop Water Filters
|
|
The Doulton Dual Countertop Water Filtration Systems are a good choice for those who have specific filtration requirements and needs sufficient removal and reduction that a standard ceramic filter cannot provide alone. Each system includes a highly efficient Ultracarb ceramic filter to achieve the highest efficiency rating in reducing harmful parasites such as cryptosporidium and giardia (99.99%), soluble lead, iron and hydrogen sulfides. The 4-stage filter also reduces asbestos fibers, dirt, chlorine taste and odor, mold, spores and algae. Other filter media can be used alongside the Ultracarb filter to reduce contaminants like Fluoride, Arsenic, MTBE, and Nitrates. The superior technology and high quality materials featured in each filtration system will ensure your drinking water is safe, clean and enjoyable. Each system includes all installation accessories that quickly and easily attaches to your faucet. The compact and versatile housings along with an easy-to-use diverter valve allow you to effortlessly switch from unfiltered to filtered water.
|
|
Features of Doulton Dual Countertop Water Filters
|
- Free-standing countertop filter system utilizing Doulton ceramic technology
- Four filtration stages within Ultracarb cartridge that is included:
- First stage: consists of Doulton Ultracarb ceramic which provides genuine sub micron filtration. The cartridge reduces fine particulate matter, bacteria, cysts and turbidity
- Second stage: the incorporation of silver locked within the ceramic structure gives enhanced bacteriostatic and self sterilizing properties
- Third stage: an inner core of activated carbon block removes chlorine and organic compounds
- Fourth stage: Ion exchange resin reduces Lead and other heavy metals
- Second specific filter for removing/reducing unwanted chemicals/contaminants along with the Ultracarb filtration. Combinations available:
- Fluoride/Ultracarb filtration: Fluoride is a common constituent of many minerals. Municipal water treatment plants commonly add fluoride to the water for prevention of tooth decay, and they try to maintain a level of 1.5-2.5 mg/l. The filter elements are designed to reduce fluorides in drinking water to below 0.5 ppm.
- Carbon Block/Ultracarb filtration: Removes volatile organic compounds (VOC’s) and chlorine from water.
- Nitrate/Ultracarb filtration: Most nitrates that occur in drinking water are the result of contamination of ground water supplies by septic systems, feed lots, and agriculture fertilizers. Filter will remove essentially prepared 100% of all nitrates and sulfates from drinking water for approximately 7,500 ppm.
- Arsenic/Ultracarb filtration: Designed to reduce arsenic in drinking water to safe drinkable levels. Effective at removing arsenic at a wider range and requires little or no pH adjustment of the raw water.
- MTBE/Ultracarb filtration: Methyl-tertiary-butyl-ether (MTBE) is the most common fuel additive used in reformulated gasoline. In drinking water, even trace amounts of MTBE can cause taste and odor problems. The M-1 granular used in the filter significantly exceeds the capacity for MTBE than that of standard activated coal-based carbon, thus reducing the threat of MTBE in drinking water.
- Reduces up to 99% of soluble lead, iron and hydrogen sulfides
- Exclusive carbon-block technology reduces >99.99% of particles 1/2 micron (absolute ANSI standard) and larger in size including pathogenic bacteria
- Reduces asbestos fibers, dirt, chlorine taste and odor, mold, spores, algae and removes 100% Cryptosporidium and Giardia
- Minerals Maintained: Ceramic filters do not remove minerals from the water which are beneficial to health
- Parts included: O-ring for housing, diverter valve with tubing and set of 2 faucet spout adapters
- Entire unit is compact and easily attaches to most standard faucets
- Economical alternative to bottled water
- Connections: 3/8 push-fit fittings
- For cold water use only
|
|
;)
