Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Ebac industrial dehumidifiers for commercial or large home dehumidification help prevent water damage and control odors, mildew, mold, allergies and asthma. Dehumidifiers ratings, reviews and comparisons. Reports by consumer experts.
Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers Expert:
Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers Operates down to 33°F and removes up to 107 pints of water per day
EB DE PD120
$2249.95
Plus $200.00 freight charge added in cart.
Availability: In stock
Condensate Pump with Tubing Pumps water up to 15 ft. high and includes 20 ft. of tubing
HP DE PUMPKT15
$84.95
Availability: In stock
P3 International P0270 Mold Alert Digital Thermometer/Hygrometer Measure the indoor humidity and temperature of the air and will alert you to favorable conditions for mold to develop
Introduction to Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Ebac’s PD120 model is capable of solving a wide variety of moisture problems. These workhorses can be placed in indoor swimming pool/spa areas, locker or laundry rooms, harsh marine environments or industrial environments where moisture control is required. Under harsh conditions the PD120 model will remove 107 pints of water per day. These rugged and reliable machines are fit to do the job in ruthless environments.
Dehumidification for indoor swimming pool/spa area:
The air inside an indoor swimming pool and/or spa or hot tub can be very humid. The reason is that large amounts of water can evaporate from the surface of the water into the air. The water surface of your pool acts like a large humidifier capable of adding significant moisture to the room. It is important to keep the pool water cooler than the air. Ideal conditions are an air temperature of 82 degrees and a water temperature of 80 degrees. If one allows these ideal conditions to change and the pool water temperature becomes higher than the air temperature, the rate of evaporation of moisture into the air will increase dramatically.
Without effective dehumidification, you risk the appearance of mold, corrosion, structural damage, and an uncomfortable pool environment.
It is also highly recommended that you use a pool cover when the pool is not in use which will reduce the amount of moisture evaporated into the air. An added benefit to covering your pool will be the energy you will save not heating your water due to the heat that would not be lost into the air.
4 Common Indicators of Humidity Problems in Your Indoor Pool or Spa Room:
1) You find it uncomfortably humid in the pool area when in street cloths
2) Strong and persistent smell of chlorine
3) Foggy windows
4) Rust on metal objects
Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers — ideal for someone who...
Has a need for portable industrial dehumidification in moderately damp to extremely wet areas and harsh conditions.
Needs powerful dehumidification up to 107 pints of water removal per day.
Needs to remove unwanted moisture within an indoor pool or spa area, thus allowing a swimmer’s body to feel comfortable leaving and entering the water.
Wants a dehumidifier that will remove moisture that may cause corrosion and structural damage within an indoor pool facility, aerobic room, workout area, or locker and laundry rooms.
Wants to reduce sensible heat loss in a specific area.
Has a small to medium sized enclosure with excessive moisture/humidity.
How it Works — Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
The effective answer to excessive humidity is a refrigeration-type dehumidifier. Warm moist air is drawn by a fan across a cold coil which causes the water vapor to condense onto the coil and drop into a container or tray. The cold air is then passed over a heat exchanger where it is warmed before being passed back into the surrounding area. A dehumidifier that has a humidistat which automatically switches it on and off saves energy and expense by maintaining the desired level of humidity with intermittent operation.
The Ebac PD120 industrial dehumidifier is basically comprised of:
1) Compressor
2) Refrigerant Evaporator Coil
3) Refrigerant Condenser Coil
4) One circulation fan
5) Remote Humidistat
6) Cabinet to house the above components
Reports by Experts and Customers - Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Expert Review:
Courtesy of AllergyBuyersClub.com
We recommend these dehumidifiers for anyone who needs a powerful and efficient dehumidifier to remove large amounts of moisture within an indoor pool facility, aerobic room, workout area, or locker and laundry rooms.
Pluses:
Easy installation: requires little installation and set-up time. Simply connect power cable to grounded power source, install draining tube, start up unit and check dehumidification process listed in manual
Remote humidistat included: allows one to mount it on the wall for ease in setting and monitoring the level of dryness
Energy Efficient: In comparison to how much water they remove these dehumidifiers run at an amperage of up to 9.2 amps per hour
High quality construction: all of the essential wiring is tightly sealed inside the cabinet to protect them from the moisture and chemicals
Minuses:
It would have been nice for ease of set-up or relocation if they had casters.
Although these units do the job and removes lots of moisture a more attractive cabinet would have been nice.
Summary:
Ebac’s PD120 dehumidifiers are the answer for anyone who currently has an existing indoor swimming pool/spa area and are in need of an easy resolution to the moisture problems resulting from this environment without complicated installation and ducting. Their quietness and energy efficiency along with their tremendous moisture removal potential make them an excellent choice for anyone with high humidity issues.
Notes regarding Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Warranty: 1 year unconditional warranty against any defects in workmanship or material. 3 years on compressor, condenser and evaporator.
Availability: These dehumidifiers are factory tested before they are sent out. Ships out within 7 days.
Sizing up the proper equipment for your needs has many variables and we recommend using our guidance. To assist you in choosing the right dehumidifier for your particular situation please call one of our product specialists at (888) 236-7231. This is a free, no obligation consultation.
Please have the information to the following questions ready when contacting us:
In what city and state is the room located?
What are the dimensions of your poolroom (length times the width times the height of the ceiling)?
Describe the quality of construction?(how well is it sealed, what material was used for the walls and ceiling)
What is the present relative humidity in the room?
What is the desired relative humidity to be achieved?
What is the average air temperature in the room?
What is the surface area of the pool?(square footage- length x width)
What is the temperature of the water?
Is the pool covered when not in use? (If it is, how many hours for any 6 hour period is it not covered)
Besides a pool, is there a spa/hot tub in the room?
If there is a spa, what is the surface area? (square footage- length x width)
If there is a spa, what is the temperature of the water?
If there is a spa, is it covered when not in use? (If it is, how many hours for any 6 hour period is it not covered)
P3 International P0270 Mold Alert Digital Thermometer/Hygrometer
P3 DE P0270$39.95
This Hygrometer-Thermometer give the present indoor humidity and temperature along with the dew-point which indicate the present comfort level along with the likelihood of moisture to form on surfaces which could lead to mold & mildew. Includes a max/min humidity/temperature readout with reset capability along with an audible/visual alarm to alert one to high humidity levels.
The Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers is only one of our
dehumidifiers.
See how the Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers compares to other models in our
dehumidifiers comparison.
You can view other models around $2249.95 with very good plus rating on
all
dehumidifiers.
This page features one of our dehumidifiers
- the
Ebac PD120 Indoor Swimming Pool/Spa and Industrial Dehumidifiers.
;)
Ebac’s PD120 model is capable of solving a wide variety of moisture problems. These workhorses can be placed in indoor swimming pool/spa areas, locker or laundry rooms, harsh marine environments or industrial environments where moisture control is required. Under harsh conditions the PD120 model will remove 107 pints of water per day. These rugged and reliable machines are fit to do the job in ruthless environments.
