Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Ebac industrial dehumidifiers for commercial or large home dehumidification help prevent water damage and control odors, mildew, mold, allergies and asthma. Dehumidifiers ratings, reviews and comparisons. Reports by consumer experts.
Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers Expert:
Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers Operates down to 33°F and removes up to 200 pints of water per day On Sale - Save $560!
EB DE PD200
$3560.00 $2999.00
Plus $200.00 freight charge added in cart.
Availability: In stock
Condensate Pump with Tubing Pumps water up to 15 ft. high and includes 20 ft. of tubing
HP DE PUMPKT15
$84.95
Availability: In stock
P3 International P0270 Mold Alert Digital Thermometer/Hygrometer Measure the indoor humidity and temperature of the air and will alert you to favorable conditions for mold to develop
Introduction to Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
The Ebac PD200 dehumidifiers are capable of solving a wide variety of moisture problems in indoor swimming pool/spa areas, locker rooms, fitness centers, warehouses and other industrial environments where moisture control is required. You simply set the dial and air humidity remains at the desired level clearing the damp air and removing condensation from windows, walls and ceilings. Under harsh conditions this workhorse will remove more than 300 pounds of water per day from the environment. The PD200 is self-contained for quick and easy installation - no duct work required! However, there are optional inlet/outlet duct flanges if there is a need for ducting the unit. These rugged and reliable machines are fit to do the job in ruthless environments.
Dehumidification for indoor swimming pool/spa area:
The air inside an indoor swimming pool and/or spa or hot tub can be very humid. The reason is that large amounts of water can evaporate from the surface of the water into the air. The water surface of your pool acts like a large humidifier capable of adding significant moisture to the room. It is important to keep the pool water cooler than the air. Ideal conditions are an air temperature of 82 degrees and a water temperature of 80 degrees. If one allows these ideal conditions to change and the pool water temperature becomes higher than the air temperature, the rate of evaporation of moisture into the air will increase dramatically.
Without effective dehumidification, you risk the appearance of mold, corrosion, structural damage, and an uncomfortable pool environment.
It is also highly recommended that you use a pool cover when the pool is not in use which will reduce the amount of moisture evaporated into the air. An added benefit to covering your pool will be the energy you will save not heating your water due to the heat that would not be lost into the air.
4 Common Indicators of Humidity Problems in Your Indoor Pool or Spa Room:
1) You find it uncomfortably humid in the pool area when in street cloths
2) Strong and persistent smell of chlorine
3) Foggy windows
4) Rust on metal objects
Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers — ideal for someone who...
Has a need for portable industrial dehumidification in moderately damp to extremely wet areas and harsh conditions.
Needs to remove unwanted moisture within an indoor pool or spa area, thus allowing a swimmer’s body to feel comfortable leaving and entering the water.
Wants a dehumidifier that will remove moisture that may cause corrosion and structural damage within an indoor pool facility, aerobic room, workout area, or locker and laundry rooms.
Wants to reduce sensible heat loss in a specific area.
How it Works — Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
The PD200 units are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area. Because the PD200 is equipped with an external, remote humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.
Notes regarding Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers
Warranty: 1 year unconditional warranty against any defects in workmanship or material. 3 years on compressor, condenser and evaporator.
Availability: These dehumidifiers are factory tested before they are sent out. Ships out within 7 days.
Sizing up the proper equipment for your needs has many variables and we recommend using our guidance. To assist you in choosing the right dehumidifier for your particular situation please call one of our product specialists at (888) 236-7231. This is a free, no obligation consultation.
Please have the information to the following questions ready when contacting us:
In what city and state is the room located?
What are the dimensions of your poolroom (length times the width times the height of the ceiling)?
Describe the quality of construction?(how well is it sealed, what material was used for the walls and ceiling)
What is the present relative humidity in the room?
What is the desired relative humidity to be achieved?
What is the average air temperature in the room?
What is the surface area of the pool?(square footage- length x width)
What is the temperature of the water?
Is the pool covered when not in use? (If it is, how many hours for any 6 hour period is it not covered)
Besides a pool, is there a spa/hot tub in the room?
If there is a spa, what is the surface area? (square footage- length x width)
If there is a spa, what is the temperature of the water?
If there is a spa, is it covered when not in use? (If it is, how many hours for any 6 hour period is it not covered)
P3 International P0270 Mold Alert Digital Thermometer/Hygrometer
P3 DE P0270$39.95
This Hygrometer-Thermometer give the present indoor humidity and temperature along with the dew-point which indicate the present comfort level along with the likelihood of moisture to form on surfaces which could lead to mold & mildew. Includes a max/min humidity/temperature readout with reset capability along with an audible/visual alarm to alert one to high humidity levels.
The Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers is only one of our
dehumidifiers.
See how the Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers compares to other models in our
dehumidifiers comparison.
You can view other models around $2999.00 with very good plus rating on
all
dehumidifiers.
This page features one of our dehumidifiers
- the
Ebac PD200 Indoor Swimming Pool/Spa and Industrial Dehumidifiers.
;)
The Ebac PD200 dehumidifiers are capable of solving a wide variety of moisture problems in indoor swimming pool/spa areas, locker rooms, fitness centers, warehouses and other industrial environments where moisture control is required. You simply set the dial and air humidity remains at the desired level clearing the damp air and removing condensation from windows, walls and ceilings. Under harsh conditions this workhorse will remove more than 300 pounds of water per day from the environment. The PD200 is self-contained for quick and easy installation - no duct work required! However, there are optional inlet/outlet duct flanges if there is a need for ducting the unit. These rugged and reliable machines are fit to do the job in ruthless environments.
